BCGYH - ADIPRENE L-83

Export as PDF
Product Identification

Product ID:ADIPRENE L-83
MSDS Date:01/01/1985
FSC:8030
NIIN:00N001070
MSDS Number: BCGYH

Responsible Party
E.I. DUPONT DE NEMOURS & CO.,

Emergency Phone: (302) 774-1000

Cage: 19898

Contractor
E.I. DUPONT DE NEMOURS & CO., INC.
1635 WILMINGTON, DE 19898 US

Telephone: 800-441-7515

Cage: 19898

Ingredients

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Effects of Overexposure:MAY CAUSE IRRIT TO SKIN,EYES & RESP TRACT DUE
TO TRACES OF TDI.OF APPROX 0.1%. POSS ALLERG RESP.

First Aid

First Aid:SKIN:IMMED REMOVE EXCESS & WASH EXPOS AREA THOROUGHLY
W/SOAP/WATER.EYES:FLUSH W/WATER AT LEAST 15 MIN. CALL MD.IF
NOSE,THROAT OR LUNGS BECOME IRRIT,REMOVE TO FRESH AIR.WASH CLOTHING
BEFORE REUSE.DISCA RD SHOES IF CONTAM INSIDE.

Fire Fighting

Flash Point:>350F CC, >177C
Extinguishing Media:STANDARD FIRE EXTINGUISHERS
Fire Fighting Procedures:USE REGULAR PROCEDURES
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:PROTECTIVE CLOTHING SHOULD BE AVAILABLE WHERE
SPILLS MAY OCCUR.FOR SPILLS,DAM & SOAK UP W/ABSORBENT MATERIAL SUCH
AS SAND OR EARTH.DISCARD IN VENTED CAN.

Handling

Handling and Storage Precautions:AVOID BRTHNG VAPOR.AVOID CNTCT
W/EYES,SKIN & CLOTHING.WASH THOROUGHLY AFTER HANDING.HARMFUL IF
INHALED.
Other Precautions:MFR RECM, BEFORE USING,READ BULLET IN AP110.1
TOXICITY & SAFE HANDLING OF A DIPRENE.

Exposure Controls

Respiratory Protection:MFR STATES RESP (NIOSH/MSHA APPRVD)MUST BE AVAIL
IF VENT SYST FAILS
Ventilation:LOCAL EXHAUST.USE W/ADEQ VENTILATION
Protective Gloves:YES
Eye Protection:SAFETY GLASSES/SIDE SHLD
Other Protective Equipment:PROTECTIVE WORK CLOTHING.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:HONEY-COLORED LIQ. CHARACTERISTIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
MOISTURE, STRONG OXIDIZERS, ALCOHOLS, AMINES
Conditions to Avoid Polymerization:KEEP CAN CLSD,CNTCT W/WATER OF HUMID
AIR CREATES PRESSURE.

Disposal

Waste Disposal Methods:DISPOSE IAW FED, STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.